Control System ATEN VK236

Specification of Control System ATEN VK236

Control System ATEN VK236 

The VK236 6-Port IR/Serial Expansion Box provides six additional IR/Serial ports for a flexible expansion of the ATEN Control System. 

This allows users to control additional IR/serial devices in an environment where more devices are required. With the advantage of an Ethernet-based connection, the expansion box can be easily connected to the VK2100 Control Box via a LAN connection from a variety of locations across a network.

Interfaces IR/Serial 6 x Programmable IR / Uni-directional RS-232 Port

6 x 2-Pole Terminal Block Connector

IR: TTL level (0 to 5 V)

– Carrier Frequency: 10KHz~455KHz;

Serial: Uni-directional RS-232 ( + - 5 V)

– Baud Rate: 300 to 115200 (default: 9600);

– Data Bit: 8 (default) or 7;

– Stop Bit: 1 (default) or 2;

– Parity: None (default), Even or Odd Ethernet • 1 x RJ-45 Female, 10/100Base-T 

• Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH 

• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: 

IP: 192.168.0.60 

Subnet Mask: 255.255.255.0 Switches Controller ID 1 x 16-segment Switch Expander ID 1 x 8-segment Switch Reset Button 1 x Semi-recessed Pushbutton USB 1 x USB Type A (Firmware upgrade only) Power Consumption DC5V:1.31W:17BTU Environmental Operating Temperature 0 – 50°C Storage Temperature –20 – 60°C Humidity 0 - 80% RH, Non-Condensing Physical Properties Housing Metal Weight 0.45 kg ( 0.99 lb ) Dimensions (L x W x H) 13.00 x 7.58 x 4.20 cm 

(5.12 x 2.98 x 1.65 in.) Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

CALL US FOR THE BEST PRICE !!!

Motion Control Systems